100% Australian Owned and Designed Steel Shield
This page contains information about the Steel Shield.
- What is it for.
- How to fit it to a Wheel.
- Manufactured from.
- External finish.
- Overview of the benefits and features.
What Is It For
Steel Shield standing in front of a Wheel.
- The Steel Shield stands in front of the Wheel the Camper Trailer Security is going to protect covering the wheel nuts and the tyre's valve.
- It has four specifically positioned holes, two at the top and two at the bottom, where the supplied Chain passes through. The Chain is placed round the outside of the Wheel then under and over the top of the leaf springs or tubular frame as used to manufacture most caravan's chassis and locked at the front, see pictures further down this page.
- Designed to protect and fit all diameter and width wheels from the smallest Wheel on a Jet Ski Trailer up to a Wheel on a 4WD Camper Trailer and all other size wheels between used on any other towable and driveable Vehicle.
- Fitting to and removing from a Wheel could not be easier or be more secure when fitted to a Wheel. Details below...
How To Fit It To A Wheel
The method to fit the three security options Supreme, Enforcer and Protector are the same except if you buy the Supreme Camper Trailer Security you have to cut the 10mm diameter High Tensile Chain to length required for your Vehicle before you can use the Steel Shroud that protects a Padlock from the three methods a thief uses to break a Padlock.
The reason why is explained about half way down the Steel Shroud page headed:
Important Please Read if purchasing the Supreme.
To read go to: Steel Shroud
If you have any questions please: Contact Us
Or go to: Fitting Instructions - NB: Opens in a new window.
- Stand the Steel Shield in front of your vehicle's Wheel.
- Start with the left side, pick up the end of the supplied Chain, place it through the bottom left hole in the Steel Shield.
- Then place the end of the Chain under and then over the top of the vehicle's leaf springs or tubular frame. Repeat the same on the right side.
- Then place both ends of the Chain through the two top holes in the Steel Shield as per the picture above.
- Enforcer or Protector - Pull the Chain tight and place the supplied Padlock in the appropriate links in the Chain to ensure the Chain stays taut as seen in the following picture.
Supreme - See Fitting Instructions - NB: Opens in a new window.
Enforcer Camper Trailer Security
Security For A Wheel
that anyone can fit to a Wheel
in less than one minute.
Steel Shield Manufactured From
- Stainless Steel and the unique shape of the Steel Shield is cut on a computerised laser cutting machine. This ensures the highest quality of workmanship, precise measurements and quality control procedures for each Steel Shield.
- One piece construction, there are:
- No welded parts.
- No moving parts.
- No bolts or screws used.
- Nothing to came loose or get lost.
Plus there is nothing to adjust
to fit to any size Wheel.
From the smallest Wheel on a Jet Ski Trailer up to a Wheel on a 4WD Camper Trailer and all size wheels between.
External Finish
Stainless Steel DOES NOT require an external finish applied to the surface to protect it from oxidation.
NB: Due to the manufacturing process when using the bending machine there will be a few marks on the back of the Steel Shield, this is unavoidable.
The fact is the first time the Camper Trailer Security Steel Shield is used to protect your towable or driveable Vehicle the side with the marks on, from the bending machine, is placed against the tyre it will get additional marks on it. The same will happen each time the Camper Trailer Security is used to protect your towable or driveable Vehicle.
As it would cost us an additional $39 to have the marks buffed off we believe purchasers of the Camper Trailer Security will agree with our decision to leave the marks there and save our clients an additional $39 especially when each time it is used it will get a black mark on it from rubbing against the tyre.
Benefits and Features
- Fit the Camper Trailer Security to any diameter Wheel no matter the width of the tyre up to a 4WD Wheel on a 4WD Camper Trailer.
- The Camper Trailer Security is available to purchase in three security options Supreme, Enforcer and Protector. For full details about each see their respective links in the menu on your left.
- 10 Year Guarantee Read detailed information about: 10 Year Guarantee NB: We know of no other Wheel Clamp sold world-wide guaranteed for 10 years.
- The Steel Shield covers the wheel nuts and the tyre's valve.
NB: Some wheel clamps can be removed by deflating the tyre.
Please Note: It would not matter if the tyre was completely deflated with a Camper Trailer Security protecting a Wheel.
WHY...
The tyre can be completely deflated and it is Impossible To Remove the Camper Trailer Security from the Wheel because the Chain used to fit the Steel Shield to the Wheel is wrapped round the vehicles leaf springs or tubular frame as used to manufacture most caravan's chassis.
We have thought of every possibility
to STOP a thief from stealing your towable or driveable Vehicle fitted with a
Camper Trailer Security.
Manufacturer Direct Special Offer
Place your order within the next 29 days and SAVE
Plus place your order within the next 3 hours and the manufacturer will deliver your order FREE OF CHARGE.
Full details go to: Special Offer
Your investment to purchase and/or
to place your order go to:
Price List / Secure Order Form. NB: Opens in a new window.
Recommended Security Product Web Sites
Each of the following web sites opens in a new window.
|
Wheel Clamp
|
Padlock Protection
Miscellaneous
|
Hide Away Safe
Protects a Padlock
High Tensile Chain
|
